Nickel 201 Wire
Nickel Alloy 201 Wire
201 Nickel
nickel wire 0.025 mm
High purity 99.98% N02000 nickel 200 pure nickel wire 0.025mm



Name | nichrome pure nickel wire |
Form | Round wire,Flat wire,Strip,Bar,Spring shaped wire, Wave shaped strip,Radiant tube heater |
Delivery condition | Bright annealed,Oxidized,Pickled,Enameled |
Size | Wire: 0.030mm-10mm |
Ribbon: 0.05*0.2mm-2.0*6.0mm |
Strip: 0.5*5.0mm-5.0*250mm |
furnance spring wire according to customers requirement |
Types of Nickel 201 Wire
 | Nickel 201 Wire | Nickel 201 Wire 201 Nickel Wire 201 Alloy Wire Nickel UNS N02201 Wire Nickel WERKSTOFF NR. 2.4068 Wire ASTM B160 201 Nickel Wire |
 | Nickel 201 Coil Wire | Nickel 201 Coil Wire 201 Nickel Coil Wire Nickel Alloy 201 Steel Coil Wire Nickel UNS N02201 Coil Wire Nickel WERKSTOFF NR. 2.4068 Coil Wire ASME SB160 201 Nickel Coil Wire |
201 Nickel Wire Chemical Composition
Grade | C | Mn | Si | Cu | S | Cr | Fe | Ni | N |
Nickel 201 | 0.15 max | 0.35 max | 0.35 max | 0.25 max | 0.01 max | – | 0.40 max | 99.0 min | – |
Nickel 201 Wire Mechanical Properties
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Nickel 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Equivalent Grades for 201 Nickel Wire
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | – | LC-Ni 99 |
Grade | Ni+Co | Cu | Si | Mn | C | Mg | S | P | Fe |
N4 | 99.9 | 0.015 | 0.03 | 0.002 | 0.01 | 0.01 | 0.001 | 0.001 | 0.04 |
N6 | 99.6 | 0.1 | 0.1 | 0.05 | 0.1 | 0.1 | 0.005 | 0.002 | 0.1 |
Ni201 | 99 | ≤0.25 | ≤0.35 | ≤0.35 | ≤0.02 | / | ≤0.01 | / | ≤0.40 |
Ni200 | 99 | 0.2 | 0.3 | 0.3 | 0.15 | / | 0.01 | / | 0.4 |
|
Diameter | 0.03 | >0.03-0.10 | >0.10-0.40 | >0.40-0.80 | >0.80-1.20 | >1.20-2.00 |
Tolerance | ±0.0025 | ±0.005 | ±0.006 | ±0.013 | ±0.02 | ±0.03 |
|
Diameter(mm) | Status | Tensile strength,N/mm2 | Elongation% (no less than) |
N4 | N6. DN. Nsi0.19. NMg0.1 |
0.03-0.20 | M | ≥370 | ≥420 | 15 |
0.20-0.50 | ≥340 | ≥390 | 20 |
0.50-1.00 | ≥310 | ≥370 | 20 |
1.00-6.00 | ≥290 | ≥340 | 25 |
0.10-0.50 | Y2 | 685-885 | 780-980 | - |
0.50-1.00 | 580-785 | 685-835 | - |
1.00-6.00 | 490-640 | 540-685 | - |
0.03-0.09 | Y | 780-1275 | 880-1325 | - |
0.09-0.50 | 753-980 | 830-1080 | - |
0.50-1.00 | 685-880 | 735-980 | - |
1.00-6.00 | 535-835 | 640-885 | - |
Nickel 201 Wire Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Company inform:


Shanghai Yila Stainless steel Co., Ltd specialized in produce of high resistance wire,nickel chromium heating wire,iron chromium aluminum heatingwire,flat wire,stainless steel wire and so on.The products are widely used in industrial electric furnace heating equipment and civil heating appliance,automobile exhaust purification metal honeycomb carrier,high-speed locomotive brake, lifting motor brake electric voltage regulator,diamond heating element and so on.
If your company uses the above products, please give us the opportunity to quote. We can be very competitive.Smaller quantities are welcome. Please give us a call and see if we can become one of your valued suppliers.
Nickel 201 Wire Packaging
Nickel 201 Wire are individually wrapped by hand to ensure that the high quality of the material is maintained and no damage in the last stages of production. We recommend Plywood cases or pallet packaging to ensure safe packaging and prompt delivery of the ordered consignment. 201 Nickel Wire come with imprints relevant to the job information (eg, heat number, size, material and part number). This information is also printed along all delivered Wire. Nickel 201 ASTM B160 Wire packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.
Q: Are you trading company or manufacturer?
A: We are direct factory who owns production lines and workers. Everything is flexible and there is no need to worry about extra
charges by the middle man or trader.
Q: Which countries do you export to?
A: Our goods are mainly exported to Australia, Canada, UK, USA, Germany, Thailand, South Korea and so on.
Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your minimum order quantity?
A: Actually there is no MOQ for our products. But usually we recommend a quantity based on the price which is easy to accept.
Q: How about the delivery time?
A: It is based on the order,normally within 15-30 days after receiving your advance payment.